TV prototype production is a critical link in the R&D of electronic consumer products, bridging the gap between design concepts and mass production. Unlike regular prototypes, TV prototypes must validate not only appearance and structure but also the compatibility of internal components (НАПРИМЕР., motherboards, screens) and user experience (НАПРИМЕР., bracket rotation, interface usability). This article breaks down the full production process, key technologies, and material selections using comparisons, practical examples, and data, helping you create reliable TV prototypes for design verification and market testing.
1. Pre-Production: Clarify Core Requirements
Before starting fabrication, define the prototype’s validation goals to avoid misalignment with R&D needs. TV prototypes typically focus on four key requirements:
| Requirement Category | Key Validation Goals | Real-World Application Example |
| Проверка внешнего вида | Confirm design elements like screen ratio (НАПРИМЕР., 16:9, 21:9), bezel width (НАПРИМЕР., 5mm ultra-narrow), material texture (НАПРИМЕР., metallic frame, matte back cover), и logo position. | A smart TV brand tests a prototype to ensure the 21:9 ultra-wide screen and 3mm bezel match the initial design—critical for marketing “slim design” claims. |
| Structural Validation | Test the stability of the base/stand, layout of heat dissipation holes, and assembly space for internal components (НАПРИМЕР., motherboards, источники питания). | An OLED TV prototype’s base is tested to support 15kg (the TV’s weight) without tipping over; heat dissipation holes are checked for proper alignment with the motherboard. |
| Функциональная проверка | Simulate real usage to test button feel, interface compatibility (НАПРИМЕР., HDMI, USB), и screen-body fit (НАПРИМЕР., no gaps between the screen and frame). | A prototype’s HDMI 2.1 port is tested with a gaming console to confirm stable 4K/120Hz signal transmission—avoiding post-launch user complaints about interface issues. |
| Process Validation | Verify the feasibility of surface treatments (НАПРИМЕР., распыление, гальванизация) and material selections (НАПРИМЕР., aluminum alloy for frames, plastic for back covers). | A manufacturer tests electroplating on a prototype’s metal frame to ensure uniform metallic luster—preventing batch inconsistencies in mass production. |
2. Design Stage: 3D Моделирование & Part Splitting
Use professional CAD software to create a precise digital model, focusing on TV-specific structural details and processability.
2.1 3D Modeling Key Rules
| Design Focus | Requirements & Советы | Reason for Attention |
| Точность размеров | Strictly follow design drawings for critical dimensions: screen size (НАПРИМЕР., 55-дюйм, 65-дюйм), interface position (НАПРИМЕР., HDMI ports 20mm from the bottom edge), и bezel width (error ≤0.1mm). | A 55-inch TV prototype with a 0.2mm wider bezel may look “bulky” compared to the design—ruining the “ultra-slim” aesthetic. |
| Thin-Wall Treatment | TV frames and back covers are often thin (1-3 мм). For 3D printing/CNC machining, добавлять Структуры поддержки (for SLA printing) or optimize cutting paths (Для ЧПУ) во избежание деформации. | A 2mm-thick plastic back cover prototype, if printed without supports, may warp by 1.5mm—making it impossible to assemble with the frame. |
| Curved Screen Simulation | For curved TV prototypes, accurately model the screen curvature (НАПРИМЕР., R5000mm) and use transparent materials (НАПРИМЕР., акрил, clear resin) to simulate glass screens. | A curved OLED TV prototype uses a transparent resin screen with R4500mm curvature to test how light reflects off the curved surface—critical for reducing user eye strain. |
2.2 Part Splitting Strategy
Split the TV into modular components for easier production and assembly:
- Main Components: Screen frame, back cover, base/stand, interface panel, and internal brackets.
- Splitting Principles:
- Separate parts with different materials (НАПРИМЕР., metal frame vs. plastic back cover) to simplify material selection.
- Reserve 0.1–0.2mm assembly gaps between parts (НАПРИМЕР., frame and back cover) to avoid tight fits during assembly.
- Split large parts (НАПРИМЕР., a 65-inch back cover) into smaller sections if using 3D printing (max print size limit: ~300mm for most FDM printers).
3. Prototype Fabrication: Выберите правильную технологию
Select fabrication methods based on your prototype’s purpose, Размер партии, и материальные потребности. TV prototypes commonly use three core technologies:
| Fabrication Method | Применимые сценарии | Key Technologies & Материалы | Преимущества | Недостатки |
| 3D Печать | Appearance verification, small-size components (НАПРИМЕР., Дистанционное управление, button panels), preliminary structural testing. | – SLA/DLP: Высокая задача (± 0,05 мм) Для гладких поверхностей (НАПРИМЕР., screen frames); материалы: фоточувствительная смола (white/transparent).- СЛС: For complex structures (НАПРИМЕР., articulated brackets); материал: нейлон (жесткий, no supports needed). | Быстрый (12–24 часа на часть), low cost for single prototypes, Идеально подходит для сложных форм. | Limited to plastic/resin; not suitable for large metal parts (НАПРИМЕР., базы). |
| Обработка с ЧПУ | Metal material verification, high-precision structural parts (НАПРИМЕР., aluminum alloy frames, heat dissipation holes), screw hole testing. | – Five-axis CNC: For curved or irregular parts (НАПРИМЕР., curved TV frames); материалы: алюминиевый сплав, нержавеющая сталь, медь. | Ультра-высокая точность (± 0,05 мм), real metal texture, durable for repeated assembly tests. | Медленный (3–5 days per part), high cost for small batches. |
| Replica Molding | Small-batch reproduction (НАПРИМЕР., 10–50 units for exhibitions, marketing samples), complex shape replication. | Use 3D-printed/CNC-machined parts as master molds; produce copies via silicone molds with materials like polyurethane or epoxy resin. | Low cost per unit, fast batch production, consistent quality across copies. | Requires a master mold (adds initial cost); not suitable for high-precision metal parts. |
Selection Guide Table: Match Method to Your Needs
| Сценарий | Рекомендуемый метод | Материальный пример | Время выполнения |
| Low-cost appearance test (1–2 units) | 3D Печать (СЛА) | White photosensitive resin | 1–2 дней |
| Metal frame verification (5 единицы) | Обработка с ЧПУ | Алюминиевый сплав 6061 | 3–4 дня |
| Exhibition samples (20 единицы) | Replica Molding | Полиуретан | 2–3 дней |
4. Сборка & Функциональное тестирование
Assemble components into a complete prototype and validate its performance against pre-defined requirements.
4.1 Процесс сборки
- Component Preparation: Clean parts to remove burrs or dust (НАПРИМЕР., sand the CNC-machined frame with 800-mesh sandpaper).
- Пошаговая сборка:
- Attach the screen to the frame (use double-sided tape or screws for stability).
- Install internal brackets to fix the motherboard and power supply.
- Assemble the base/stand (ensure it locks securely with the TV body).
- Assembly Simulation: Follow the mass production assembly sequence to identify potential issues (НАПРИМЕР., “Is the motherboard easy to install without interfering with the power supply?”).
4.2 Key Functional Tests
| Тип теста | Как выступить | Pass/Fail Criteria |
| Тест внешнего вида | Check gap uniformity (between screen and frame: ≤0.1mm), material texture consistency, and logo alignment. | No visible gaps, унифицированная текстура, logo centered within ±0.5mm. |
| Структурное испытание | Test base load-bearing (apply 1.5x the TV’s weight for 24 часы), bracket rotation (НАПРИМЕР., 180° swivel for wall-mounted TVs), and heat dissipation hole ventilation (use a wind tunnel to measure airflow). | Base doesn’t deform; bracket rotates smoothly without jamming; airflow meets 5L/min (minimum for heat dissipation). |
| Interface Test | Plug in HDMI, USB, and power cables to verify fit (no loose connections) and function (НАПРИМЕР., USB port charges a phone, HDMI transmits video). | All interfaces fit securely; functions work without glitches. |
| Screen Simulation | Use an acrylic board (for appearance prototypes) or LED screen (for functional prototypes) to test screen-body fit and light leakage (check for light seepage around the frame). | No light leakage; screen fits flush with the frame. |
5. Пост-обработка & Оптимизация
Refine the prototype’s appearance and functionality to meet design standards and fix common defects.
5.1 Варианты обработки поверхности
| Метод лечения | Цель | Пример приложения |
| Распылитель | Achieve color effects (НАПРИМЕР., matte black, gradient color) or simulate materials (НАПРИМЕР., imitation metal). | A prototype’s back cover is sprayed with matte black paint to reduce fingerprint visibility—improving user experience. |
| Шелковая печать | Add screen parameters (НАПРИМЕР., “4K UHD”), логотипы, or key identifiers (НАПРИМЕР., «Кнопка питания»). | HDMI port labels are silk-screened on the interface panel to guide users—avoiding confusion with USB ports. |
| Гальванизация | Create a metallic finish (НАПРИМЕР., хром, никель) for metal frames or plastic parts. | A prototype’s aluminum alloy frame is electroplated with nickel to enhance corrosion resistance and metallic luster. |
5.2 Common Defect Fixes
| Дефект | Причины | Решения |
| Frame Deformation | Thin-wall structure (1–2 мм) + improper CNC cutting paths; 3D printing without supports. | Optimize CNC cutting speed (reduce to 30mm/s); add SLA supports for thin parts; use stronger materials (НАПРИМЕР., aluminum alloy instead of plastic). |
| Interface Looseness | Incorrect hole diameter (НАПРИМЕР., USB port hole is 0.2mm too large); poor assembly alignment. | Adjust 3D model to reduce hole diameter by 0.1mm; use guide pins during assembly to ensure alignment. |
| Light Leakage | Gaps between the screen and frame; uneven screen installation. | Add foam gaskets between the screen and frame; use screws to secure the screen evenly (4–6 screws for a 55-inch TV). |
6. Key Notes for TV Prototype Production
To avoid costly rework and ensure prototype reliability, follow these critical guidelines:
- Размерная точность: Use calipers and coordinate measuring machines (ШМ) Чтобы проверить ключевые размеры (НАПРИМЕР., screen size, interface position) with an error ≤0.1mm.
- Assembly Simulation: Plan internal component layouts (НАПРИМЕР., motherboard, battery 仓) in advance to avoid interference during mass production (НАПРИМЕР., “Does the power supply block the heat dissipation fan?”).
- Surface Treatment Consistency: For multi-batch prototypes (НАПРИМЕР., 10 exhibition samples), use the same paint batch and electroplating parameters to ensure uniform color and texture.
- Confidentiality: Sign a non-disclosure agreement (NDA) with the prototype manufacturer to protect unlaunched design details—critical for preventing design theft.
7. Yigu Technology’s Perspective on TV Prototype Production
В Yigu Technology, we’ve found that TV prototype success depends on balancing “design fidelity” and “process feasibility.” Many clients initially prioritize ultra-thin bezels (НАПРИМЕР., 2мм) but overlook that 3D-printed prototypes may warp—we recommend starting with a 3mm bezel for the first prototype, then optimizing to 2mm after structural validation. Для выбора материала, we often advise combining aluminum alloy (для кадров, via CNC) and SLA resin (for back covers, via 3D printing)—this balances durability and cost. Например, a client designing a 65-inch QLED TV saved 30% on prototype costs by using this hybrid approach, while still validating both appearance and structure. TV prototypes are not just “models”—they’re tools to de-risk mass production, so attention to detail (НАПРИМЕР., 0.1mm gap control) не подлежит обсуждению.
8. Часто задаваемые вопросы: Common Questions About TV Prototype Production
1 квартал: Can I use 3D printing for the entire TV prototype (including the frame and base)?
А1: It depends on the prototype’s purpose. For appearance tests, 3D-printed resin can simulate the frame and base. But for structural tests (НАПРИМЕР., load-bearing), Металлические детали (НАПРИМЕР., aluminum alloy base via CNC) are needed—3D-printed plastic lacks the strength to support the TV’s weight (10–20kg) не сломавшись.
2 квартал: How long does it take to produce a TV prototype?
А2: Lead time varies by method and complexity. A simple appearance prototype (55-дюйм, 3D-printed SLA) занимает 1–2 дня. A functional prototype with CNC-machined metal parts and assembly takes 3–5 days. Small-batch replica prototypes (20 единицы) take 2–3 days after the master mold is ready.
Q3: Why does my TV prototype have gaps between the screen and frame?
А3: Gaps are usually caused by two issues: (1) Incorrect 3D model dimensions (НАПРИМЕР., frame is 0.2mm smaller than the screen); (2) Uneven assembly (НАПРИМЕР., screws are tighter on one side). Исправляет: Adjust the 3D model to increase frame size by 0.1mm; use a torque wrench to tighten screws evenly (5–8 N·m for plastic frames).