If you’re searching for a cost-effective stainless steel with good corrosion resistance and magnetic properties, Aisi 430 aço inoxidável is a standout choice. As a ferritic grade, it’s widely used in everyday products and industrial applications alike. This guide will walk you through its key specs, desempenho, and how to work with it—so you can make the right choice for your project.
1. Aisi 430 Aço inoxidável: Visão geral & Principais especificações
Para começar, let’s break down the basics ofAisi 430 aço inoxidável—from its chemical makeup to industry standards.
Composição química
OAisi 430 composição is what defines its properties. It contains 16–18% chromium, which gives it corrosion resistance, and very little nickel (unlike austenitic grades like 304). Other elements include manganese (máx 1.0%), silicon (máx 1.0%), e a430 carbon range of max 0.12%. This simple composition keeps costs low while maintaining performance.
Industry Standards & Equivalents
Aisi 430 is governed by global standards to ensure consistency:
- 430 UNS S43000: The official identifier in the Unified Numbering System.
- 430 ASTM A240/A276: ASTM A240 covers plates and sheets; ASTM A276 applies to bars and wire.
- 430 EM 1.4016 equivalente: The European standard match, used widely in EU-based projects.
Físico & Propriedades mecânicas
Below is a table of critical properties that makeAisi 430 aço inoxidável useful for many applications:
| Propriedade | Valor |
|---|---|
| 430 densidade | 7.75 g/cm³ |
| 430 ponto de fusão | 1425 ° c |
| 430 yield strength | 205 MPA |
| 430 resistência à tracção | 450 MPA |
| 430 Dureza de Brinell | 150–180 HB |
| 430 ferritic microstructure | Gives it magnetic properties and good ductility |
| 430 magnetic permeability | Strongly magnetic (unlike non-magnetic austenitic grades) |
Exemplo: A manufacturer of kitchen appliances usesAisi 430 aço inoxidável for fridge doors. Itsmagnetic permeability lets magnets stick to the surface, and itsDureza de Brinell (150–180 HB) resists scratches from daily use.
2. Resistência à corrosão & Desempenho ambiental
Aisi 430 aço inoxidável offers solid corrosion resistance in mild environments—here’s how it performs.
Key Corrosion Behaviors
- 430 atmospheric corrosion: Excellent resistance to dry and slightly humid air. It’s often used for outdoor architectural cladding that doesn’t face saltwater.
- 430 mild chloride tolerance: Can handle low chloride levels (like indoor plumbing) but may rust in coastal areas or saltwater.
- 430 resistência a oxidação até 870 ° c: Maintains strength and resists scaling at high temperatures—great for heat exchanger fins or exhaust covers.
- 430 stress corrosion cracking immunity: Unlike some grades, it won’t crack under stress in corrosive environments (a big plus for structural parts).
Resistência química & Teste
- 430 sulfuric acid limits: Resists dilute sulfuric acid (até 10% concentração) at room temperature but should avoid high concentrations.
- 430 nitric acid resistance: Handles dilute nitric acid well, making it suitable for food equipment that uses mild cleaning chemicals.
- 430 Teste de pulverização de sal ASTM B117: In this test, it typically shows minimal rust after 48–72 hours (ideal for indoor or sheltered outdoor use).
- 430 intergranular corrosion risk: Low risk if not heated above 600 °C for long. If welded, a post-weld anneal can further reduce this risk.
Estudo de caso: A company makes430 aço inoxidável washing machine drums. The drums face water and detergent (mild chemicals), e430 Resistência à corrosão keeps them rust-free for 10+ anos. Customers rarely report drum rust—even with weekly use.
3. Tratamento térmico & Controle de microestrutura
Proper heat treatment helps get the most out ofAisi 430 aço inoxidável—here’s what you need to know.
Common Heat Treatment Processes
| Processo | Temperatura | Propósito |
|---|---|---|
| 430 annealing 750–850 °C | 750–850 °C (Lento fresco) | Reduces hardness, improves ductility, and relieves stress |
| 430 residual stress relief | 600–700 °C | Removes stress from welding or cold working |
| 430 hot working range 1100–800 °C | 1100–800 °C | Shapes the metal (Por exemplo, forging or rolling) sem quebrar |
Critical Considerations
- 430 Formação da fase sigma 475 ° c: Avoid holding the metal at 400–500 °C for long. This creates a brittle “sigma phase” that weakens the material.
- 430 ferrite grain size ASTM 5–8: The ideal grain size (ASTM 5–8) balances strength and ductility. Use controlled annealing to maintain this size.
- 430 cold work strain hardening: Trabalho frio (like bending) increases hardness—anneal if you need to shape it further.
- 430 recrystallization temperature: Around 650 °C—heating above this temp softens the metal after cold working.
Exemplo: A fabricator bendsAisi 430 aço inoxidável sheets into elevator panels. Depois de dobrar, they anneal at 750 °C to reduce hardness—this makes the panels easier to polish to a mirror finish.
4. Soldagem, Fabricação & Diretrizes de usinagem
Working withAisi 430 aço inoxidável requires specific steps to avoid issues—here’s your guide.
Dicas de soldagem
- 430 weldability challenges: Welding can cause grain coarsening (making the metal brittle). Preheating and post-weld annealing help.
- 430 preheat 150–200 °C: Preheating slows cooling and reduces cracking risk.
- 430 filler metal ER430/439: These fillers match the base metal’s composition, ensuring strong, corrosion-resistant welds.
- 430 post-weld anneal: Anneal at 750–850 °C after welding to restore ductility and reduce stress.
Usinagem & Fabricação
- 430 velocidade de usinagem e feeds: Use speeds of 150–250 m/min (for turning) and feeds of 0.1–0.3 mm/rev. This prevents overheating.
- 430 Vida da ferramenta com inserções de carboneto: Carbide tools last 3–4x longer than high-speed steel (HSS) when machining AISI 430.
- 430 formability limits: It can be bent up to 180° (for thin sheets) and has good 430 deep drawability—great for making washing machine drums or food containers.
- 430 spin forming parameters: Use slow spin speeds (500–1000 RPM) for thick parts to avoid distortion.
Estudo de caso: An automotive supplier makes430 aço inoxidável aparar. They use deep drawing to shape the trim, then machine edges with carbide tools. O processo produz 10,000+ trim pieces per month with minimal defects—thanks to propervelocidade de usinagem e feeds.
5. Formulários de produto, Tamanhos & Cadeia de mantimentos
Aisi 430 aço inoxidável comes in many forms to fit different projects—here’s what’s available.
Formulários comuns do produto
- 430 espessuras de placa de aço inoxidável: 2–100 mm (used for industrial machinery parts).
- 430 Gráfico do medidor de chapas: 26 medidor (0.45 mm) para 8 medidor (4.0 mm) (used for kitchen appliances and trim).
- 430 larguras de fenda da bobina: 50–1600 mm (used for mass-produced parts like heat exchanger fins).
- 430 Estoque de barra redonda: Diameters 5–200 mm (used for fasteners and small components).
- 430 seamless tube ASTM A268: Sizes ½–8 inches (used for plumbing and chemical lines).
- 430 mirror finish sheets: Available in 0.5–3 mm thicknesses (used for elevator panels and display cabinets).
Dicas da cadeia de suprimentos
- 430 tolerâncias de barra plana: Most suppliers offer tolerances of ±0.1 mm for thickness—ideal for precision parts.
- 430 Tamanhos de ferro ângulo: Common sizes include 20x20x3 mm to 100x100x10 mm (used for structural supports).
- 430 custom blanks: Suppliers can cut blanks to your exact size (Por exemplo, 300×500 mm for appliance parts) with 1–2 week lead times.
- 430 Padrões de folha perfurados: Holes range from 1–10 mm in diameter (used for ventilation grilles).
6. Aplicações do setor & Estudos de caso
Aisi 430 aço inoxidável is used in countless products—here are some key examples.
Principais aplicações
- 430 automotive trim: Resists scratches and mild weather, making it perfect for car bumpers and door trim.
- 430 Aparelhos de cozinha: Used for fridge doors, oven exteriors, and dishwasher panels (thanks to its magnetic properties and corrosion resistance).
- 430 washing machine drums: Handles water and detergent without rusting.
- 430 architectural cladding: Adds a sleek look to buildings and resists atmospheric corrosion.
- 430 heat exchanger fins: Withstands high temperatures (até 870 ° c) and transfers heat efficiently.
- 430 solar water heater tanks: Resists corrosion from water and works well in outdoor settings.
Exemplo do mundo real: A furniture company uses430 aço inoxidável display cabinets for retail stores. Omirror finish sheets attract customers, and the metal’s corrosion resistance keeps cabinets looking new—even in humid stores. They’ve sold over 5,000 cabinets with zero rust complaints.
Yigu Technology’s Perspective on AISI 430 Aço inoxidável
Na tecnologia Yigu, we’ve suppliedAisi 430 aço inoxidável to appliance, Automotivo, and construction clients for years. Its low cost, magnetic properties, and good corrosion resistance make it a top pick for everyday products. We often recommend430 mirror finish sheets for decorative parts and help clients with custom cutting to reduce waste. For welding projects, we advise post-weld annealing to keep the metal strong—ensuring our clients’ products last.
FAQ About AISI 430 Aço inoxidável
- É aisi 430 stainless steel magnetic?
Sim! Its 430 ferritic microstructure gives it strong magnetic permeability—unlike non-magnetic austenitic grades like 304. This makes it great for fridge doors, magnetic boards, and any part that needs to attract magnets. - Pode Aisi 430 be used outdoors?
It works well in sheltered outdoor areas (like covered patios) thanks to its atmospheric corrosion resistance. But avoid coastal areas or places with high salt—its mild chloride tolerance means it may rust there. For coastal use, add a protective coating. - What’s the best way to machine AISI 430?
Use inserções de carboneto (not HSS) for longer tool life, and stick to velocidade de usinagem e feeds of 150–250 m/min (turning) and 0.1–0.3 mm/rev. If the metal gets too hard after cold working, anneal it at 750–850 °C first to soften it.
