How Long Does 3D Printing Take? A Practical Guide to Time Estimation

Si alguna vez te has preguntado, “How long will my 3D print take?"No estás solo. Whether you’re printing a small keychain or a large prototype, 3D printing time varies widely—from 30 minutes to several days. The uncertainty often leads to frustration: missing project deadlines, wasting time waiting for failed prints, or overplanning for quick jobs. Esta guía desglosa el key factors that determine 3D printing time, gives you actionable ways to estimate and optimize it, and solves common time-related problems, helping you plan your projects with confidence.

1. Core Factors That Determine 3D Printing Time

3D printing time isn’t random—it’s shaped by six main factors. Understanding these helps you predict how long a print will take and adjust settings to save time without sacrificing quality.

1.1 Size and Complexity of the Printed Object

The bigger or more intricate your model, the longer it takes to print. Think of it like baking a cake: a small cupcake bakes faster than a multi-layered wedding cake.

• Tamaño: A 5cm x 5cm x 5cm cube (pequeño) Toma 1 a 2 horas, while a 30cm x 30cm x 30cm storage box (grande) puede tomar de 24 a 48 horas.
• Complejidad: Models with detailed features (P.EJ., small text, intricate lattices) or overhangs need more time. Por ejemplo:
• A simple figurine (no small details) takes 3–5 hours.
• A figurine with tiny facial features (2mm eyes, 1mm mouth) and overhanging arms takes 6–8 hours (more time for precise layer placement and supports).

The table below compares time for different sizes and complexities:

1.2 Printing Accuracy (Altura de la capa)

Altura de la capa (the thickness of each layer the printer builds) directly impacts time. Thinner layers mean more layers to print—slower, but smoother. Thicker layers mean fewer layers—faster, but rougher.

• Alta precisión (0.1Altura de la capa mm): Great for detailed models (P.EJ., joyas, miniaturas). A 10cm tall figurine with 0.1mm layers needs 1000 capas (10cm ÷ 0.01cm = 1000), taking 6–8 hours.
• Medium Accuracy (0.2Altura de la capa mm): The sweet spot for most projects (P.EJ., fundas telefónicas, prototipos). The same 10cm figurine needs 500 capas, taking 3–5 hours.
• Low Accuracy (0.3Altura de la capa mm): For rough, partes funcionales (P.EJ., a temporary bracket). The 10cm figurine needs 333 capas, taking 2–3 hours.

Common Problem Solved: “Why is my small model taking so long?"

You’re likely using a too-thin layer height. If you don’t need a super-smooth finish, switch from 0.1mm to 0.2mm layer height—this cuts time by 30–40%.

1.3 Print Density (Relleno)

Print density (the amount of material inside the model) affects both time and strength. Higher density = more material = longer time.

• 100% Densidad (Sólido): Para fuerte, piezas de carga (P.EJ., un mango de herramienta). A 10cm x 10cm x 10cm cube takes 6–8 hours.
• 50% Densidad (Semi-Solid): For moderate strength (P.EJ., una caja de teléfono). The same cube takes 3–4 hours.
• 0% Densidad (Hollow): Para el peso ligero, piezas decorativas (P.EJ., a hanging ornament). The cube takes 30–60 minutes (only the outer walls are printed).

Ejemplo: A user prints a 15cm tall plant pot. Usando 20% infill takes 4 hours—perfect for holding soil. If they accidentally use 100% relleno, se necesita 12 hours and is unnecessarily heavy.

1.4 Velocidad de impresión

Printing speed (how fast the nozzle moves while extruding material) is measured in mm/s (millimeters per second). Faster speeds = shorter time, but too fast can ruin quality.

• Slow Speed (20–40mm/s): For detailed models (P.EJ., miniaturas). Ensures the nozzle moves carefully to capture small features.
• Medium Speed (50–80 mm/s): Para la mayoría de los proyectos (P.EJ., prototipos, decoración). Balances speed and quality.
• Velocidad rápida (90–150mm/s): Para grande, piezas simples (P.EJ., a big storage bin). High-end printers handle fast speeds better without errors.

The table below shows how speed affects time for a 10cm x 10cm x 10cm cube (0.2Altura de la capa mm, 50% relleno):

1.5 Printer Structure Stability

A stable printer can handle faster speeds without shaking—saving time. Unstable printers (P.EJ., wobbly frames) need slower speeds to avoid blurry prints or layer shifts.

• Stable Printers: Industrial-grade printers or well-built home printers (P.EJ., Prusa i3) can run at 80–120mm/s without issues.
• Unstable Printers: Barato, flimsy printers may need to run at 30–50mm/s to stay accurate—doubling or tripling print time.

Consejo: If your printer shakes during fast prints, stabilize it by placing it on a heavy table or adding anti-vibration pads under the feet. This lets you increase speed and cut time.

1.6 Estructuras de soporte

Models with overhangs (parts that stick out more than 45°) necesidad estructuras de soporte (extra material to hold them up). Supports add time to print and remove.

• No Supports: A flat model (P.EJ., a coaster) acepta 30 minutos.
• Light Supports: A model with small overhangs (P.EJ., a figurine with slightly outstretched arms) adds 30–60 minutes to print time.
• Heavy Supports: A model with large overhangs (P.EJ., a aircraft wing) adds 2–4 hours to print time (plus time to remove supports).

2. How to Estimate 3D Printing Time (Paso a paso)

You don’t need to guess—use these simple steps to estimate time accurately:

1. Use Slicer Software: Every 3D printer needs slicer software (P.EJ., Tratamiento, Prusaslicer) to convert your model into printer code. Slicers have a built-in “time estimator” that calculates time based on your settings (altura de la capa, velocidad, relleno).

• Ejemplo: Import a 10cm figurine into Cura, set 0.2mm layer height, 50% relleno, 60mm/s speed—the slicer will say “Estimated Time: 3.5 hours.”

2. Adjust for Real-World Factors: Slicers are accurate, but add 10–20% extra time for:

• Printer warm-up (5–10 minutos).
• Minor pauses (P.EJ., nozzle priming, filament changes).
• Slowdowns for complex sections (P.EJ., the slicer may automatically slow speed for small details).

3. Use Online Calculators: For quick estimates (before slicing), use tools like 3D Print Time Calculator. Enter model size, altura de la capa, and speed—it gives a rough time.

3. How to Optimize 3D Printing Time (Without Ruining Quality)

If your print is taking too long, use these tricks to speed it up while keeping the part usable:

• Aumentar la altura de la capa: Switch from 0.1mm to 0.2mm (cuts time by 30%—quality is still good for most projects).
• Lower Infill: Reduce from 100% to 20–50% (saves time—only use 100% for parts that need maximum strength).
• Increase Speed: Raise speed from 50mm/s to 70–80mm/s (test first with a small sample to ensure quality).
• Minimize Supports: Redesign the model to reduce overhangs (P.EJ., tilt a part so overhangs are under 45°—no supports needed).
• Use a Faster Printer: If you print often, invest in a high-speed printer (P.EJ., a CoreXY printer that runs at 150mm/s).

Ejemplo: A user has a 6-hour print for a prototype. Ellos:

1. Increase layer height from 0.15mm to 0.2mm.
2. Lower infill from 50% a 30%.
3. Increase speed from 60mm/s to 80mm/s.

The new time is 3.5 hours—half the original time, and the prototype is still strong enough for testing.

4. Real-World Time Scenarios

To make it concrete, here are common 3D printing projects and their typical times:

• Small Decor (P.EJ., keychain, fridge magnet): 30 minutos - 2 horas.
• Partes funcionales (P.EJ., phone case, small bracket): 2–6 horas.
• Medium Prototypes (P.EJ., toy car, plant pot): 6–12 horas.
• Large Models (P.EJ., storage box, big figurine): 12–48 horas.
• Industrial Prototypes (P.EJ., piezas aeroespaciales): 24–72 horas (high accuracy and strength needed).

La perspectiva de la tecnología de Yigu

En la tecnología yigu, sabemos how long 3D printing takes is a top concern for users—time wasted on slow prints hurts productivity. Our solutions include a smart slicer tool with AI-powered time estimation (adjusts for real-world factors like printer stability) and high-speed printers (up to 150mm/s) that maintain quality. We also offer material bundles (P.EJ., fast-print PLA) optimized for speed. Para usuarios, we recommend starting with our time-estimation guide to avoid overplanning. As 3D tech evolves, we’ll integrate faster extrusion systems to cut time further, making 3D printing more efficient for everyone.

Preguntas frecuentes

1. Why is my print taking longer than the slicer’s estimate?

Slicers don’t account for real-world delays: printer warm-up, filament tangles, or automatic speed reductions for complex sections. Add 10–20% to the slicer’s time for a more accurate estimate. If it’s way longer, check for issues (P.EJ., a clogged nozzle slowing extrusion).

2. Can I pause a long print (P.EJ., 24 horas) and resume later?

Sí! Most printers have a pause button. To avoid problems:

• Keep the build plate heated (prevents the print from detaching).
• Don’t move the printer or plate while paused.
• Resume within 24 horas (longer pauses can cause nozzle clogs).

3. Does using a different material change print time?

Sí, pero solo un poco. Estampado (fácil de imprimir) y petg (slightly slower) have similar times for the same settings. Resina (used in SLA printers) is faster for small, detailed parts—e.g., a 5cm miniature takes 1–2 hours with resin vs. 3–4 hours with PLA. Metal powder (industrial) is slower—large parts take days.